Get started with Viewing Church broadcasts (meetinghouse)
All content on this page is moving to clerksupport.lds.org under the Meetinghouse Technology topic. This page will be deleted at the end of October.
|
This checklist will help you prepare for viewing Church broadcasts.
| Check | Task | Description |
|---|---|---|
| Select a solution for viewing Church broadcasts | Review the following Church supported solutions and select the one that best suits your needs: | |
| Review requirements | Review list of technical requirements associated with your selected solution to understand what is needed for your unit to view a Church broadcast. Requirements are found on the individual pages listed above. | |
| Assess your situation | Based on the requirements, catalog what tools and equipment you already have in place and identify gaps.
| |
| Get needed equipment | Based on the gaps you identified in your assessment, get the additional equipment you need. | |
| Test your solution | Assemble and test your solution well in advance of the broadcast event. This will allow you to verify that you:
| |
| Identify backup solutions | What would happen in the case of technology failure and/or signal loss? Plan for backup solutions in advance of your event. NOTE: Many units already have the equipment for a live, audio-only backup; allowing congregations to listen to the event. | |
| Know where to go for help | For technical issues, please refer to the Answers page or contact the Global Service Desk at +1 (801) 240-4357. |
This page was last modified on 20 July 2012, at 09:23.
This page has been accessed 3,149 times.