How to Share a MS PowerPoint presentation while we are broadcasting...
-
- New Member
- Posts: 1
- Joined: Fri Aug 19, 2011 2:39 pm
How to Share a MS PowerPoint presentation while we are broadcasting...
We are going to use this tool this weekend, but the speaker for this FPE Fireside will present a powerpoint file during his talk, how can we share the presentation by this tool? Because if we do it by the simple camera maybe we are going to lose quality in the image of slides.
-
- Member
- Posts: 422
- Joined: Sun May 10, 2009 4:44 pm
- Location: Gilbert, AZ USA
Let me see if I understand your question correctly. Do you want to send a PowerPoint presentation from a laptop to another device such as a TV or Webcast Communicator?
If so, you can convert the VGA monitor output (15 pin) of a laptop to standard video (composite or S-video) by using a Scan Converter. These relatively inexpensive devices can be found on eBay (see http://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l2736&_nkw=vga+to+video+scan+converter for examples).
A scan converter takes the laptop's VGA output and converts it to standard composite video which can then be connected directly to a TV or Webcast Communitcator composite video (yellow) input, S-Video input, or other video device, resulting in a much higher quality picture than by just using a camera pointed to a screen.
To switch from your video camera feed to the scan converter's feed, you can use a video switch (http://www.ebay.com/sch/i.html?_from=R40&_trksid=p3984.m570.l1313&_nkw=video+switch&_sacat=See-All-Categories) or video mixer (preferred see: http://www.ebay.com/sch/i.html?_nkw=videonics+mx-1&_sacat=0&_odkw=mx-1&_osacat=0&_trksid=p3286.c0.m270.l1313)
If so, you can convert the VGA monitor output (15 pin) of a laptop to standard video (composite or S-video) by using a Scan Converter. These relatively inexpensive devices can be found on eBay (see http://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l2736&_nkw=vga+to+video+scan+converter for examples).
A scan converter takes the laptop's VGA output and converts it to standard composite video which can then be connected directly to a TV or Webcast Communitcator composite video (yellow) input, S-Video input, or other video device, resulting in a much higher quality picture than by just using a camera pointed to a screen.
To switch from your video camera feed to the scan converter's feed, you can use a video switch (http://www.ebay.com/sch/i.html?_from=R40&_trksid=p3984.m570.l1313&_nkw=video+switch&_sacat=See-All-Categories) or video mixer (preferred see: http://www.ebay.com/sch/i.html?_nkw=videonics+mx-1&_sacat=0&_odkw=mx-1&_osacat=0&_trksid=p3286.c0.m270.l1313)
-
- Senior Member
- Posts: 851
- Joined: Sun Sep 12, 2010 3:14 pm
- Location: South Jordan, Utah
This discussion is very timely for me. I have one other question though -- my laptop has both an s-video and a VGA output. Does anyone know if it is possible to use both at the same time? I was hoping this would eliminate the need for a scan converter, but I played with it a bit last night and couldn't get it to work.
Craig
South Jordan, UT
South Jordan, UT
-
- Senior Member
- Posts: 851
- Joined: Sun Sep 12, 2010 3:14 pm
- Location: South Jordan, Utah
-
- Member
- Posts: 422
- Joined: Sun May 10, 2009 4:44 pm
- Location: Gilbert, AZ USA
The ability to use multiple video outputs from your laptop depends on the laptop and associated display drivers.
A quick, easy solution would be to use a video distribution amplifier. There are several advantages to using one...1) the memory of the laptop's video can be utilized higher resolution because it is running less displays, 2) most distribution amplifiers have 3 outputs so a monitor, projector and building can easily be connected, 3) some units amplify composite video as well as S-Video (either S-Video or composite input and double the number of outputs). These can usually be purchased from $10 to $30 (see http://www.amazon.com/Composite-S-Video-Distribution-Amplifier-Splitter/dp/B003CMDGJK/ref=sr_1_2?ie=UTF8&qid=1313983846&sr=8-2.)
A quick, easy solution would be to use a video distribution amplifier. There are several advantages to using one...1) the memory of the laptop's video can be utilized higher resolution because it is running less displays, 2) most distribution amplifiers have 3 outputs so a monitor, projector and building can easily be connected, 3) some units amplify composite video as well as S-Video (either S-Video or composite input and double the number of outputs). These can usually be purchased from $10 to $30 (see http://www.amazon.com/Composite-S-Video-Distribution-Amplifier-Splitter/dp/B003CMDGJK/ref=sr_1_2?ie=UTF8&qid=1313983846&sr=8-2.)
-
- Senior Member
- Posts: 851
- Joined: Sun Sep 12, 2010 3:14 pm
- Location: South Jordan, Utah
-
- New Member
- Posts: 3
- Joined: Sun Oct 09, 2011 7:31 am
Scan Converter
Hello, I work for a company that does a lot of Audio Video work for the church, in meeting houses, and even in buildings like the conference center, etc...
Scan Converter are not relatively inexpensive as someone previously posted. The cheap ones are inexpensive, but if you want one that will look really good, and not have any scrolling lines, you can easily spend from $800-$2000. These are the ones that are being put into new stake centers.
http://www.extron.com/product/product.a ... vsc500&s=5
Also you do NOT need to make the computers resolution 640x480, most scan converters will accept 1024x768 which is a 4x3 aspect ratio, some will do higher resolutions as well but be mindful of how small the font is, as well as the aspect ratio as a scan converter will NOT change aspect ratio.
-Blake H
Professional Audio Video Technician
Scan Converter are not relatively inexpensive as someone previously posted. The cheap ones are inexpensive, but if you want one that will look really good, and not have any scrolling lines, you can easily spend from $800-$2000. These are the ones that are being put into new stake centers.
http://www.extron.com/product/product.a ... vsc500&s=5
Also you do NOT need to make the computers resolution 640x480, most scan converters will accept 1024x768 which is a 4x3 aspect ratio, some will do higher resolutions as well but be mindful of how small the font is, as well as the aspect ratio as a scan converter will NOT change aspect ratio.
-Blake H
Professional Audio Video Technician
-
- Senior Member
- Posts: 501
- Joined: Thu Jan 03, 2008 7:52 pm
craiggsmith wrote:This discussion is very timely for me. I have one other question though -- my laptop has both an s-video and a VGA output. Does anyone know if it is possible to use both at the same time? I was hoping this would eliminate the need for a scan converter, but I played with it a bit last night and couldn't get it to work.
Craig, I have a laptop that has S-video, VGA and the main monitor. I can only use two of the three screens at any one time. However, I have use the S-video out to put pictures to a VCR and it has worked like a champ. The one issue that I see is getting the presentation on to the screen.
I guess that is we have an "old" stake center, we would have to purchase the scan converter?
-
- Member
- Posts: 422
- Joined: Sun May 10, 2009 4:44 pm
- Location: Gilbert, AZ USA
BTW, I have found that connecting the laptop to the scan converter and then connecting the scan converter to the projector has resulted in a loss of picture quality on the projector.
I found that connecting from the computer to the projector (VGA) and using the monitor out jack (VGA) on the back of the projector to connect to the scan converter results in a picture that looks very good and has no scrolling lines.
I found that connecting from the computer to the projector (VGA) and using the monitor out jack (VGA) on the back of the projector to connect to the scan converter results in a picture that looks very good and has no scrolling lines.