**UPDATE**
Meetinghouse Webcast is the official solution for local units of The Church of Jesus Christ of Latter-day Saints to broadcast meetings over the Internet to other locations. Webcast technology provides an alternative to travel for stake conferences, regional conferences, firesides, and training meetings.
In February 2009, the Church released the Meetinghouse Webcast Communicator. The Communicator includes the hardware and software needed to encode and send a webcast stream. To meet the needs of those with custom hardware configurations, the Church is now beta testing a software-only solution for use on Microsoft Windows XP, Vista, or 7.
To learn more, please visit the Meetinghouse Webcast Software Beta page.
Meetinghouse Webcast Software Beta Begins
- McDanielCA
- Member
- Posts: 486
- Joined: Wed Jul 18, 2007 4:38 pm
- Location: Salt Lake City, Utah
-
- Member
- Posts: 77
- Joined: Thu Feb 08, 2007 9:42 am
- Location: Arizona
-
- Church Employee
- Posts: 70
- Joined: Wed Jul 15, 2009 3:34 pm
- Location: USA
- McDanielCA
- Member
- Posts: 486
- Joined: Wed Jul 18, 2007 4:38 pm
- Location: Salt Lake City, Utah
-
- Member
- Posts: 105
- Joined: Sun Feb 15, 2009 8:45 am
- Location: Chester, England
For me the older version looks better, although I could never get to use it with windows 7.
I kept getting a dialog box saying I needed windows encoder 9 or later.
I then installed windows encoder 9 using the same page and the software would not recognise that it was installed and would not run.
I wanted the normal version not beta as the beta version had problems seperating audio from video.
I would try and put audio on using the line input and then set it as default on all settings.
Including setting it on the live input.
However despite setting the line input as default and the sound bars showing that the sound coming from the line input, in reality the sound broadcast would only come from the camera and not the line input.
Yet when I went to windows expression 4 I could seperate the sound and audio. Please help!
We wanted to do a trial broadcast for the area seventy and stake presidents but this was not possible because of this hitch.
Stephensinclair8@aol.com Chester butt stake clerk.
I kept getting a dialog box saying I needed windows encoder 9 or later.
I then installed windows encoder 9 using the same page and the software would not recognise that it was installed and would not run.
I wanted the normal version not beta as the beta version had problems seperating audio from video.
I would try and put audio on using the line input and then set it as default on all settings.
Including setting it on the live input.
However despite setting the line input as default and the sound bars showing that the sound coming from the line input, in reality the sound broadcast would only come from the camera and not the line input.
Yet when I went to windows expression 4 I could seperate the sound and audio. Please help!
We wanted to do a trial broadcast for the area seventy and stake presidents but this was not possible because of this hitch.
Stephensinclair8@aol.com Chester butt stake clerk.
-
- New Member
- Posts: 1
- Joined: Sun Jan 23, 2011 4:39 pm