Wiping a church HD, and how do I request a new printer??

Discussions around the setup, operation, replacement, and disposal of clerk computers, not to include using MLS
Sterling-p40
New Member
Posts: 1
Joined: Thu Sep 03, 2009 10:31 am
Location: Saratoga Springs, UT, USA

Wiping a church HD, and how do I request a new printer??

#1

Post by Sterling-p40 »

Sorry, two topics in one, but I hope someone can help because I'm the Stake Technology guy and haven't done most of this stuff for the church before.

One of our secretaries managed somehow to requisition a new computer (does someone have a link to a document on how this is done because I should be doing this, not one of the other Stake guys). The old computer is just sitting there and they asked me to zero out the HD. Anyone know what the policy is on this and what tools have you used do to this? Then what happens to that computer?

Secondly, in another ward their HP laser printer doesn't seem to want to talk USB anymore. They said it had been having problems for a while and now it just shows as device not recognized. I had them borrow another wards printer to finish up their tithing on Sunday, but I need to get them a new printer I guess. How do I requisition a new printer? And what do I do with the old one?

Thanks a TON for any help you can give me.

-Sterling
User avatar
aebrown
Community Administrator
Posts: 15153
Joined: Tue Nov 27, 2007 8:48 pm
Location: Draper, Utah

#2

Post by aebrown »

Sterling wrote:One of our secretaries managed somehow to requisition a new computer (does someone have a link to a document on how this is done because I should be doing this, not one of the other Stake guys). The old computer is just sitting there and they asked me to zero out the HD. Anyone know what the policy is on this and what tools have you used do to this? Then what happens to that computer?
First of all, the Policies and Guidelines for Computers Used by Clerks for Church Record Keeping should be your best friend. It explains a lot of the policies.

You'll read there that computer replacements are to to be done by the FM group with the involvement of the STS and the stake PFR. The FM Group will give you instructions as to what to do with the old computer.

Another site that should be your friend is the MLS download site. There you will find (under Additional Local Unit Software) utilities for scrubbing the hard disk (but other disk scrubbing utilities could be used as well).
Sterling wrote:Secondly, in another ward their HP laser printer doesn't seem to want to talk USB anymore. They said it had been having problems for a while and now it just shows as device not recognized. I had them borrow another wards printer to finish up their tithing on Sunday, but I need to get them a new printer I guess. How do I requisition a new printer? And what do I do with the old one?
In the policy document I referenced above, you will read:
If a printer fails and it is out of warranty, the stake technology specialist determines whether the printer should be repaired or replaced. The stake physical facilities representative contacts the FM group to order repairs or a replacement. The FM group repairs or replaces the printer using operational or contingency funds.
So the basic answer is that you work with the FM group (through your stake's PFR). The FM group will give you instructions as to what to do with the old one. Our current FM group takes the old printer away, but that is a local decision.
Questions that can benefit the larger community should be asked in a public forum, not a private message.
russellhltn
Community Administrator
Posts: 34418
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

#3

Post by russellhltn »

Alan_Brown wrote:but other disk scrubbing utilities could be used as well.
Personally, I like Darik's Boot And Nuke

These types of utilities are not fast, so I'd suggest starting it before your block meeting.
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.

So we can better help you, please edit your Profile to include your general location.
aaronmarksmith
New Member
Posts: 17
Joined: Sun Aug 22, 2010 11:05 pm
Location: Deer Park, WA, USA

#4

Post by aaronmarksmith »

I'm also a fan of DBAN...been using it for years. I used the program sent on a floppy disk by the church when making the transition from MIS/FIS to MLS, and from old hardware to new hardware. I suppose it worked just as well, but I can't see licensing a program when there's a comparable free/open-source program.
@@ron
User avatar
aebrown
Community Administrator
Posts: 15153
Joined: Tue Nov 27, 2007 8:48 pm
Location: Draper, Utah

#5

Post by aebrown »

geeksmith wrote:I'm also a fan of DBAN...been using it for years. I used the program sent on a floppy disk by the church when making the transition from MIS/FIS to MLS, and from old hardware to new hardware. I suppose it worked just as well, but I can't see licensing a program when there's a comparable free/open-source program.
The Church hasn't been using that old floppy-based program for many years. That's the one that required us to report license usage. Now the Church has put Eraser (which is also free software) on the MLS download site, so there's no question of licensing a program. But I've used DBAN as well, which is certainly acceptable, too.
Questions that can benefit the larger community should be asked in a public forum, not a private message.
rwoodmansee
New Member
Posts: 38
Joined: Sun Jul 18, 2010 1:40 pm
Location: Carrollton, TX USA

#6

Post by rwoodmansee »

What is the expected result using Eraser? Is it suppose to erase everything? I booted the old machine and then ran Eraser against the C: Drive. It took forever... when it finished, i was still able to boot the machine. Shouldn't it erase the whole C: drive? (but how can it erase everything if you are running the program from the C: drive?)
russellhltn
Community Administrator
Posts: 34418
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

#7

Post by russellhltn »

Some programs only clear the unused disk space, such as empty sectors and slack space. I've not used Eraser myself, but if it were me, I'd check to see if it was mis-set.

(And add me to list of people who've used DBAN.)
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.

So we can better help you, please edit your Profile to include your general location.
jdlessley
Community Moderators
Posts: 9858
Joined: Mon Mar 17, 2008 12:30 am
Location: USA, TX

#8

Post by jdlessley »

I have used Eraser to wipe one computer's hard drive for turn-in. I don't recall the steps, but I created a bootable floppy with the program on it, booted from that floppy, and erased the hard drive. Since I do not have my STS calling anymore and I do not have the notebook with all my notes, I cannot be more specific.
JD Lessley
Have you tried finding your answer on the ChurchofJesusChrist.org Help Center or Tech Wiki?
rwoodmansee
New Member
Posts: 38
Joined: Sun Jul 18, 2010 1:40 pm
Location: Carrollton, TX USA

#9

Post by rwoodmansee »

I gave up on using Eraser and tried DBAN but guess I downloaded the wrong version (2.2.6) and was getting a Configuration File Not Found error. I jumped onto their forum and found that I needed download verson 1.07. I burned that iso this eveing and will try it out tomorrow evening.

Good thing I live close to the church house.
scorch29
New Member
Posts: 11
Joined: Mon Mar 28, 2011 9:57 am
Location: St. George, UT USA

DBAN link that works

#10

Post by scorch29 »

I've been trying for 3 hours to get the DBAN 2.2.6 version to work. Then I found this post and someone saying they used 1.07 and it worked. So, I found a link that offered the 1.0.7 DBAN version and posting it here for everyone. I wouldn't want anyone else spending 3 hours trying to figure this out....but the experience is priceless. I am in the process of wiping the hard drive with the 1.0.7 and it is running. I'm confident it will work.

https://sourceforge.net/projects/dban/f ... o/download
Post Reply

Return to “Clerk Computers”