Send/Receive Errors Today
-
- New Member
- Posts: 30
- Joined: Mon Oct 22, 2007 9:47 pm
- Location: Sacramento, California, USA
I tried another send/receive on my stake computer on the way home from work this afternoon and received the same server error message I received on Sunday. The send/receive was sucessful on my ward computer this morning. I guess the servers went down again, although a check with the CHQ recording says the servers are up.
-
- Community Moderators
- Posts: 3183
- Joined: Sun Jan 13, 2008 6:48 pm
- Location: California
I called the membership department this afternoon to clear a "security transmission" error.DJC wrote:It appears to be a database problem on the back end servers. Possibly the same as last week. No ETA on when they will be back up, but I will post as soon as I hear word.
While I was on the phone I inquired as to the problem on Sunday and was told that it was a hardware failure. He didn't elaborate, but let's hope that whatever it was that's it's been nailed.
- jeromer7
- Member
- Posts: 228
- Joined: Thu May 17, 2007 12:46 pm
- Location: Bellevue, Nebraska
I had one clerk report success this morning, but another reported that when he stopped in after work today he got the time out error three times in a row. Something's going on...gpetersen wrote:I tried another send/receive on my stake computer on the way home from work this afternoon and received the same server error message I received on Sunday.
JLR
- mkmurray
- Senior Member
- Posts: 3266
- Joined: Tue Jan 23, 2007 9:56 pm
- Location: Utah
- Contact:
crislapi mentioned a few posts ago (http://tech.lds.org/forum/showthread.ph ... #post18180) the need to reboot computers to get the transmission to go through. This might be a good suggestion for those of you still getting errors.JLRose wrote:I had one clerk report success this morning, but another reported that when he stopped in after work today he got the time out error three times in a row. Something's going on...
-
- New Member
- Posts: 30
- Joined: Mon Oct 22, 2007 9:47 pm
- Location: Sacramento, California, USA
mkmurray wrote:crislapi mentioned a few posts ago (http://tech.lds.org/forum/showthread.ph ... #post18180) the need to reboot computers to get the transmission to go through. This might be a good suggestion for those of you still getting errors.
I think he was referring to pc's that were already running MLS and failed in their send/receive. My attempt this afternoon was on a cold pc that I had just been powered up.
- opee
- Member
- Posts: 338
- Joined: Mon Jun 25, 2007 3:00 am
- Location: Sunnyvale, CA
October 19th 2008 connection issues
I am having failures in connecting via High Speed Connection. Not sure if others are having the same issue today.
-
- Community Moderators
- Posts: 3183
- Joined: Sun Jan 13, 2008 6:48 pm
- Location: California
I'm not seeing connection errors. Rather the error appears to be related to the transmission of the Temple Recommend updates, which would possibly restrict them to Stake transmissions only as wards do not update these items. Just a thought.
I'm wondering if it might be a fall-out of this past Friday's upgrades or a new issue?
Either way there's no-one at CHQ today so we're probably going to have to wait until Monday to find out.
I'm wondering if it might be a fall-out of this past Friday's upgrades or a new issue?
Either way there's no-one at CHQ today so we're probably going to have to wait until Monday to find out.
Have you read the Code of Conduct?
-
- Community Moderators
- Posts: 3183
- Joined: Sun Jan 13, 2008 6:48 pm
- Location: California
- mkmurray
- Senior Member
- Posts: 3266
- Joined: Tue Jan 23, 2007 9:56 pm
- Location: Utah
- Contact: