I recently learned of the LDSTech site. I am intrigued by the ideas being generated here and I am interested in helping.
My background is in electrical engineering. I design hardware for embedded systems and have very limited software development experience. Although I do maintain a HTML based family website and missionary meal calendar for the 3 sets of missionaries in our ward.
Most of the projects I see in the forums and in the Projects section of the site are very software-centric. I acknowledge that an environment like this is more conducive to software development, but are there any plans to start projects with new hardware elements?
Is there an infrastructure in place that would support new project suggestions that involve the development of new hardware? I understand that this opens up a can of worms when it comes to schematic capture and layout tool licensing and file formats; not to mention design specifications, component selection, firmware development, and system integration.
-James
Hardware related projects??
-
- New Member
- Posts: 5
- Joined: Sun Jul 20, 2008 9:51 pm
- Location: Danbury, CT
- Mikerowaved
- Community Moderators
- Posts: 4744
- Joined: Sun Dec 23, 2007 12:56 am
- Location: Layton, UT
Welcome to the forum! WOO HOO! Another hardware Engineer!
OK, now that the celebrations are over, I don't know of any hardware oriented projects open for public input, but I don't work for the Church either, so please don't take that as a definitive answer. Perhaps someone closer to the Church's inner workings would be willing to shed some light.
Mike
OK, now that the celebrations are over, I don't know of any hardware oriented projects open for public input, but I don't work for the Church either, so please don't take that as a definitive answer. Perhaps someone closer to the Church's inner workings would be willing to shed some light.
Mike
So we can better help you, please edit your Profile to include your general location.
- WelchTC
- Senior Member
- Posts: 2085
- Joined: Wed Sep 06, 2006 8:51 am
- Location: Kaysville, UT, USA
- Contact:
- hpaulsen
- Member
- Posts: 112
- Joined: Fri Mar 09, 2007 12:53 pm
- Location: Barstow, CA
- Contact:
I don't know of any universally needed hardware projects. At one time, I wanted to make a hardware interface to capture printer output from our automatic door locks and provide a computer interface. No-one has - and no-one is likely to - read through pages and pages of entry logs to identify problems. A computer program would make it easier to make sure codes are updated and could automatically identify odd occurrences. Unfortunately, I imagine that other buildings use different door locking systems, and also that there are surely other door locking systems that could theoretically be purchased (if the need was shown to be great enough) which provide these capabilities.
The only other hardware I want is a telephony interface so that we can send reminder calls to people and collect information from them re: home teaching, meetings, assignments, etc. Again, there are already systems out there - if I could just convince anyone that they're worth getting.
Perhaps those of you with more experience designing hardware would have some better ideas of how hardware could help advance the kingdom.
The only other hardware I want is a telephony interface so that we can send reminder calls to people and collect information from them re: home teaching, meetings, assignments, etc. Again, there are already systems out there - if I could just convince anyone that they're worth getting.
Perhaps those of you with more experience designing hardware would have some better ideas of how hardware could help advance the kingdom.
-
- Community Administrator
- Posts: 34513
- Joined: Sat Jan 20, 2007 2:53 pm
- Location: U.S.
Well, my degree says "Electrical Engineer" so I guess that makes me a hardware guy too. But it's been ages since I've built anything. I've found it's usually better to get something off the shelf and modify it.
The only place I've seen custom hardware is back in the day of analog satellite system for the foreign languages.
The only place I've seen custom hardware is back in the day of analog satellite system for the foreign languages.
- Mikerowaved
- Community Moderators
- Posts: 4744
- Joined: Sun Dec 23, 2007 12:56 am
- Location: Layton, UT
I love the quote, "Why buy something for $10 when you can build it for $100?" Incredible how much truth there is the that with many things nowadays.RussellHltn wrote:I've found it's usually better to get something off the shelf...
So we can better help you, please edit your Profile to include your general location.
- brado426
- Member
- Posts: 313
- Joined: Sun Feb 11, 2007 9:50 pm
- Location: Foothill Ranch, CA
- Contact:
I have no formal electronics experience, but I did do a project once that allowed a person to replace the unreliable original electronics of an old pinball machine with a PC running Windows that controls all the solenoids and lamps via a parallel port.
Fun project, but I doubt the Church owns any pinball machines that need an overhaul.
Brad O.
Fun project, but I doubt the Church owns any pinball machines that need an overhaul.
Brad O.