This forum contains resources meant to answer the most frequently asked questions relating to the local unit copier program; also, instructional documentation related to basic operation of copiers, features, and toner cartridge and drum replacement.
4 posts • Page 1 of 1
I have a xerox 4150 copier and someone in the library removed the Toner RF Crum sticker. I found the Sticker and put them back on but now the copier tells me that the Drum it not installed correctly and when I get the drum to work than the copier tells me the toner is not installed correctly. Can I buy new RF crum Sticker or do i just need to start again with new Toner and Drum? By the way one of the Toners is brand new but the RF Crum was removed. Thoughts.......
harpert wrote:I have a xerox 4150 copier and someone in the library removed the Toner RF Crum sticker.
The original CRUM sticker may have been broken when it was removed. If you are certain the drum and toner cartridge are installed correctly and working, I would try a new sticker. The $30 is probably much cheaper than a new drum and cartridge.
And then there is the training for the Media Center staff.
Who is online
Users browsing this forum: No registered users and 1 guest