Xerox WorkCentre 4260 ip addressing
Posted: Wed Jun 19, 2013 4:26 pm
We have a Xerox 4260 and I want to set it up with a dedicated IP Address so it can be reached from the Bishop's and Clerk's offices. Currently I have it attached via Ethernet to a workstation in the library. I have an IP Address assigned but it appears to be in the DHCP pool as well. Because the printer is attached to a workstation, if the workstation is turned off, the DHCP server doesn't know the printer exists and the IP Address gets assigned out to another device.
My question is do we have a pool of addresses reserved to assign as static addresses? If so, what is the range? Also, if there is a pool of static addresses is there typically some waiting for assignment? Our building is set up for three Wards, but we have only two currently. The netmask is 255.255.255.128 the addresses being handed out are in the upper range with the default gateway at XX.XXX.XXX.129.
If there is no pool who can assign the mac address within the pool to reserve an IP Address for the printer?
My question is do we have a pool of addresses reserved to assign as static addresses? If so, what is the range? Also, if there is a pool of static addresses is there typically some waiting for assignment? Our building is set up for three Wards, but we have only two currently. The netmask is 255.255.255.128 the addresses being handed out are in the upper range with the default gateway at XX.XXX.XXX.129.
If there is no pool who can assign the mac address within the pool to reserve an IP Address for the printer?