Xerox WorkCentre 4260 ip addressing

Discussions about Internet service providers (ISPs), the Meetinghouse Firewall, wired and wireless networking, usage, management, and support of Meetinghouse Internet
tstaskiewicz
New Member
Posts: 1
Joined: Wed Jun 19, 2013 3:18 pm

Xerox WorkCentre 4260 ip addressing

Postby tstaskiewicz » Wed Jun 19, 2013 3:26 pm

We have a Xerox 4260 and I want to set it up with a dedicated IP Address so it can be reached from the Bishop's and Clerk's offices. Currently I have it attached via Ethernet to a workstation in the library. I have an IP Address assigned but it appears to be in the DHCP pool as well. Because the printer is attached to a workstation, if the workstation is turned off, the DHCP server doesn't know the printer exists and the IP Address gets assigned out to another device.

My question is do we have a pool of addresses reserved to assign as static addresses? If so, what is the range? Also, if there is a pool of static addresses is there typically some waiting for assignment? Our building is set up for three Wards, but we have only two currently. The netmask is 255.255.255.128 the addresses being handed out are in the upper range with the default gateway at XX.XXX.XXX.129.

If there is no pool who can assign the mac address within the pool to reserve an IP Address for the printer?

russellhltn
Community Administrator
Posts: 20729
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

Re: Xerox WorkCentre 4260 ip addressing

Postby russellhltn » Wed Jun 19, 2013 4:07 pm

Yes, there are static IPs available. I'd get with the Stake Technology Specilist to work out the static assignment. If you have a 881W firewall, he can see the static range in tm.lds.org.
Have you searched the Wiki?
Try using a Google search by adding "site:tech.lds.org/wiki" to the search criteria.


Return to “Meetinghouse Internet”

Who is online

Users browsing this forum: No registered users and 2 guests