881W installation
Posted: Sat Jan 26, 2013 4:17 pm
I replaced the ASA 5505 in the stake center this afternoon. The FM gave me an 881W and a 16-port Cisco switch. The activation went smoothly as documented.
The default configuration only gave me 9 static IP addresses, so I called the Global Service Center, and they added another range. The original configuration had the gateway at 129, the static IP range from 130 to 138, and the DHCP from 139 to 254.
The GSC added another static IP range from 2 to 19, and another FHCP from 20 to 126, incrementing the third octet by 1 (from 138 to 139). I reset all 12 computers in the stake center to the new static IP addresses, and everything works great.
We still have four PIX 501s and two ASA 5505s in the stake to replace this year. Ugh.
The default configuration only gave me 9 static IP addresses, so I called the Global Service Center, and they added another range. The original configuration had the gateway at 129, the static IP range from 130 to 138, and the DHCP from 139 to 254.
The GSC added another static IP range from 2 to 19, and another FHCP from 20 to 126, incrementing the third octet by 1 (from 138 to 139). I reset all 12 computers in the stake center to the new static IP addresses, and everything works great.
We still have four PIX 501s and two ASA 5505s in the stake to replace this year. Ugh.