Limiting internet usage during webcasts

Discussions about Internet service providers (ISPs), the Meetinghouse Firewall, wired and wireless networking, usage, management, and support of Meetinghouse Internet
wiscombe.peter
New Member
Posts: 14
Joined: Sat Apr 24, 2010 8:59 pm
Location: USA

Limiting internet usage during webcasts

Postby wiscombe.peter » Wed Nov 14, 2012 1:06 am

I have found a number of threads that discuss the need to limit usage during a stake conference. What I have failed to come across is any discussion or instructions on HOW to do so.

Can someone point me to any specific instructions?

User avatar
johnshaw
Senior Member
Posts: 1838
Joined: Fri Jan 19, 2007 1:55 pm
Location: Syracuse, UT

Postby johnshaw » Wed Nov 14, 2012 4:00 am

That seems incredulous, however, the discussion has centered around the following:

1. Power off any wireless access points.
2. Remove the wireless antenna on the 881W if you are lucky enough to have one.
“A long habit of not thinking a thing wrong, gives it a superficial appearance of being right, and raises at first a formidable outcry in defense of custom.”
― Thomas Paine, Common Sense

maybd
New Member
Posts: 22
Joined: Mon Nov 08, 2010 11:40 am
Location: Alexandria, VA

Postby maybd » Wed Nov 14, 2012 7:28 am

You can also temporarily change the password or unplug the Ethernet cord from the back of the wireless access point(s).

User avatar
johnshaw
Senior Member
Posts: 1838
Joined: Fri Jan 19, 2007 1:55 pm
Location: Syracuse, UT

Postby johnshaw » Wed Nov 14, 2012 7:39 am

temporarily changing the password for LDSAccess is not the preferred method from the GSC. If you have a consumer wireless access point this is an option.
“A long habit of not thinking a thing wrong, gives it a superficial appearance of being right, and raises at first a formidable outcry in defense of custom.”

― Thomas Paine, Common Sense

rolandc
Member
Posts: 257
Joined: Tue May 15, 2012 7:20 pm

Postby rolandc » Wed Nov 14, 2012 8:09 am

We simplified this process in our stake.


We simply plug all the 1041n's into a power strip. Flip one switch and all are off. Then simply remove the three antenna from the 881W and no more wifi. the 881 will only transmit a few feet with out the antenna.

However CHQ is getting to release the Technology Manager and that MIGHT allow us to remotely shut down wifi.
Roland

User avatar
johnshaw
Senior Member
Posts: 1838
Joined: Fri Jan 19, 2007 1:55 pm
Location: Syracuse, UT

Postby johnshaw » Wed Nov 14, 2012 2:01 pm

2014, 2015, 2016, I'll likely have that kind of access.... keeping my fingers crossed :)
“A long habit of not thinking a thing wrong, gives it a superficial appearance of being right, and raises at first a formidable outcry in defense of custom.”

― Thomas Paine, Common Sense

lajackson
Community Moderators
Posts: 6142
Joined: Mon Mar 17, 2008 9:27 pm
Location: US

Postby lajackson » Wed Nov 14, 2012 4:09 pm

JohnShaw wrote:2014, 2015, 2016, I'll likely have that kind of access.... keeping my fingers crossed :)

rolandc wrote:CHQ is getting to release the Technology Manager and that MIGHT allow us to remotely shut down wifi.


As with JohnShaw, I will believe it when I actually see it, but we have been told that the first release of Technology Manager will allow the stake to turn off WiFi and turn it back on again.

User avatar
johnshaw
Senior Member
Posts: 1838
Joined: Fri Jan 19, 2007 1:55 pm
Location: Syracuse, UT

Postby johnshaw » Wed Nov 14, 2012 4:21 pm

I was actually referring to the ease of disabling the wireless with the install of their 1041N... centrally powered, some strategic thought went into that.
“A long habit of not thinking a thing wrong, gives it a superficial appearance of being right, and raises at first a formidable outcry in defense of custom.”

― Thomas Paine, Common Sense

rolandc
Member
Posts: 257
Joined: Tue May 15, 2012 7:20 pm

Postby rolandc » Wed Nov 14, 2012 4:31 pm

lajackson wrote:As with JohnShaw, I will believe it when I actually see it, but we have been told that the first release of Technology Manager will allow the stake to turn off WiFi and turn it back on again.



The email that I got says that it will be a feature in a subsequent release, not the first issue.

But...

Its all a wait and see kinda thing, just like using the LDSaccess credentials for the wifi...... No longer in the works.
Roland

rolandc
Member
Posts: 257
Joined: Tue May 15, 2012 7:20 pm

Postby rolandc » Thu Nov 15, 2012 6:42 am

JohnShaw wrote:I was actually referring to the ease of disabling the wireless with the install of their 1041N... centrally powered, some strategic thought went into that.


Technology Manager or the systems in our Stake?
Roland


Return to “Meetinghouse Internet”

Who is online

Users browsing this forum: No registered users and 1 guest