Help correct the location of your ward's meetinghouse

Use this forum to discuss issues that are not found in any of the other clerk and stake technology specialist forums.
User avatar
borenmt
New Member
Posts: 29
Joined: Mon Sep 17, 2007 9:58 am
Location: Utah (Wasatch Front)
Contact:

Help correct the location of your ward's meetinghouse

Postby borenmt » Thu Jul 31, 2008 9:38 am

Many of you are probably aware of the Church's new meetinghouse locator found at http://maps.lds.org . Clerks, consider taking a few minutes to check the location of meetinghouses for your ward, branch, stake, or district. You can use the Feedback link to send corrected locations. Some tips:

1. Exact locations are often easier to see in "Aerial" or "Satellite" view.
2. When picking a correct location, the best place is usually the part of the chapel closest to the road. If you think that would be confusing for some reason, pick the spot you would want someone to drive to (like the entrance to the parking lot).
3. Microsoft and Google have different levels of both street and satellite coverage. If you're not getting good results with one of them, try the other.

While you're at it you might want to check the meeting times. You (or another clerk in your unit) can correct these yourselves on the unit's web site.

Thanks for your help -- feel free to spread the word to other clerks!

RossEvans
Senior Member
Posts: 1346
Joined: Wed Jun 11, 2008 8:52 pm
Location: Austin TX
Contact:

Postby RossEvans » Thu Jul 31, 2008 9:42 am

Mobilizing the clerks is a good move.

Unfortunately this forum reaches only a handful. Putting this in a broadcast message in the MLS system would be more effective, if you can accomplish that through channels at CHQ.

User avatar
aebrown
Community Administrator
Posts: 14685
Joined: Tue Nov 27, 2007 8:48 pm
Location: Sandy, Utah

Postby aebrown » Thu Jul 31, 2008 9:53 am

borenmt wrote:While you're at it you might want to check the meeting times. You (or another clerk in your unit) can correct these yourselves on the unit's web site.


Slight correction -- meeting times are set in MLS, not the web site. Once they are changed in MLS, they eventually (usually within a few days) are reflected on the web site.

russellhltn
Community Administrator
Posts: 20729
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

Postby russellhltn » Thu Jul 31, 2008 10:35 am

In addition to checking the chapel locations, you may want to check the directions. Depending on where the chapel is "pinned", you may find the directions are having people cut though back yards and hop the fence to get to Church. :confused: I've set coordinates on the main driveway about 25-50 feet back from the street. The 25 foot offset insures that the correct side of the street is identified.

Pinning the main driveway helps in cases where the entrance isn't obvious when you see the chapel. In our stake we have two that are like that. One has the drive way entrance down a tiny lane. The stake center's main parking lot is a parking structure just "upstream" on a one-way street. By the time you can identify the building, you've passed the entrance.

Kent Larsen-p40
New Member
Posts: 30
Joined: Sat Dec 15, 2007 5:06 pm
Location: New York City (aka Zion)

Especially Check non-US & Western Country locations

Postby Kent Larsen-p40 » Thu Jul 31, 2008 1:28 pm

This is a great improvement, IMO.

I was recently in Durban, South Africa, and discovered that about half the units in and around Durban have bad addresses on the meetinghouse locator. A couple had the name of the South African province, KwaZulu-Natal, listed as the city.

While South Africa, like most countries around the world, has a postal code system, similar to the zipcode used in the US, for some reason the meetinghouse locator doesn't use that code. All these postal code systems have a hierarchy, like the zip code, and close codes often indicate proximity.

Why doesn't the meetinhouse locator using the postal codes outside of the US?
Owner, LDSClerks

User avatar
fergie34-p40
New Member
Posts: 46
Joined: Sun Feb 03, 2008 12:34 pm
Location: Mastic, New York

Feature request

Postby fergie34-p40 » Thu Jul 31, 2008 6:35 pm

I like the new meeting house locater. I do have a request for an update though. I would like to see added to the list the name and location of the stake the units are in. If a member is moving to a new area this would be very helpful. :D
Robert Ferguson
South Shore Ward, Plainview New York Stake

User avatar
aebrown
Community Administrator
Posts: 14685
Joined: Tue Nov 27, 2007 8:48 pm
Location: Sandy, Utah

Postby aebrown » Thu Jul 31, 2008 7:22 pm

fergie34 wrote:I like the new meeting house locater. I do have a request for an update though. I would like to see added to the list the name and location of the stake the units are in. If a member is moving to a new area this would be very helpful.


I like it, too -- it's a great improvement.

As for your suggestion: When you click on a particular ward/branch, you are presented with information on the ward, including a link for "Go to Website". From the website it is immediately clear what stake the ward is in. So the functionality you ask for does exist, but it's not presented directly.

Clearly that does require a couple of clicks, but specifying the stake for each ward that is listed would take a lot of space. It's a tradeoff -- listing the stake would be somewhat helpful, but might not be worth the room.

mattprasmussen
New Member
Posts: 37
Joined: Mon Feb 05, 2007 5:22 pm
Location: Amsterdam, NY

Postby mattprasmussen » Fri Aug 01, 2008 6:12 am

I'm glad there's a way to update the location in this new version. Our building has been shown on the wrong street for years, even though we have tried two or three times to get it corrected by contacting CHQ.

scion-p40
Member
Posts: 259
Joined: Sat Apr 21, 2007 11:56 pm

Postby scion-p40 » Fri Aug 01, 2008 9:30 am

If the functionality is there, but is not apparent, it isn't very useful. I can't speak for everyone else, but I don't tend to scroll all over a page clicking on a bunch of stuff just to see if more detail is available. I used this site for a recent visit to Kanab, UT. My friend lives in the 3rd Ward and the "worship service" is listed as 10:50. We missed all of RS/AP/YW/Pri because it wasn't clear that those meetings were at 9 a.m. Looking at the website, there is no indication that the 10:50 time is not when church starts. I had no reason to double-check the info on the LDS.org ward website.

Alan_Brown wrote:I like it, too -- it's a great improvement.

As for your suggestion: When you click on a particular ward/branch, you are presented with information on the ward, including a link for "Go to Website". From the website it is immediately clear what stake the ward is in. So the functionality you ask for does exist, but it's not presented directly.

Clearly that does require a couple of clicks, but specifying the stake for each ward that is listed would take a lot of space. It's a tradeoff -- listing the stake would be somewhat helpful, but might not be worth the room.

russellhltn
Community Administrator
Posts: 20729
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

Postby russellhltn » Fri Aug 01, 2008 11:44 am

scion wrote:My friend lives in the 3rd Ward and the "worship service" is listed as 10:50. We missed all of RS/AP/YW/Pri because it wasn't clear that those meetings were at 9 a.m. Looking at the website, there is no indication that the 10:50 time is not when church starts.


I noted what it was first put up that "worship service" wasn't a part of the member vocabulary. Apparently it's aimed at non-members. You can find the more traditional "First Meeting" time if you click on a particular ward. So the information is there and just a single mouse click away. Given the limited screen space, I'm not sure what to suggest other then to use "Sacrament" rather then "Worship".


Return to “General Clerk Discussions”

Who is online

Users browsing this forum: No registered users and 1 guest