Barcode Scanner Help

Discussions around the setup, operation, replacement, and disposal of clerk computers, not to include using MLS
ecuadork
New Member
Posts: 3
Joined: Tue Mar 03, 2009 9:23 am
Location: Chino, CA, USA

Barcode Scanner Help

Postby ecuadork » Sun Mar 15, 2009 7:14 am

Hi everyone,

I am the Stake Tech Specialist and I'm having some trouble installing a barcode scanner in our computer. I want to use the scanner to read temple recommend barcodes as we activate them. The scanner is a Symbol LS2208 handheld. It has a USB connection. I've tried the quick start guide 1-2-3 steps that they indicated should be done but it is not working for us. I also tried installing the 123Scan program but it is beyond my knowledge and it looks like a customization program for the scanner. I don't know if I chose the right setting. I've tried both the HID Keyboard Emulation and the IBM hand=held usb settings. All I need it to do is scan those recommend barcodes. I installed one at work using the quick start guide and it work in a snap. Any suggestions or has anyone gone through this problem?

jdlessley
Community Moderators
Posts: 6522
Joined: Sun Mar 16, 2008 11:30 pm
Location: USA, TX

Postby jdlessley » Sun Mar 15, 2009 11:38 am

ecuadork wrote:Hi everyone,

I am the Stake Tech Specialist and I'm having some trouble installing a barcode scanner in our computer. I want to use the scanner to read temple recommend barcodes as we activate them. The scanner is a Symbol LS2208 handheld. It has a USB connection. I've tried the quick start guide 1-2-3 steps that they indicated should be done but it is not working for us. I also tried installing the 123Scan program but it is beyond my knowledge and it looks like a customization program for the scanner. I don't know if I chose the right setting. I've tried both the HID Keyboard Emulation and the IBM hand=held usb settings. All I need it to do is scan those recommend barcodes. I installed one at work using the quick start guide and it work in a snap. Any suggestions or has anyone gone through this problem?
Is this a Church provided scanner? If so, when you recieved your barcode scanner from Church HQ there should have been some installation instructions that came with it. These instructions are specific to the Church for setting up the scanner for reading temple recommend barcodes. On the instruction sheet are some bar codes. These codes, when scanned, set up the scanner for reading temple recommends.

If you did not get the Church scanner setup instructions with the scanner, or if they are missing or lost, you can send an message to MLS support either through MLS or using the address MSRMail@LDSMail.net to request a copy of those instructions.
JD Lessley
Have you tried finding your answer on the LDS.org Help Center page or the LDSTech wiki?

wwoodford
New Member
Posts: 18
Joined: Fri Jan 19, 2007 3:02 pm

Barcode Scanner Setup

Postby wwoodford » Sun Mar 15, 2009 12:58 pm

There is a a pdf file in MLS that you can print with the instructions on setting up and calibrating the barcsode scanner. I just did this on Thursday for the stake computer. I searched for *.pdf. I believe that title contains barcode scanner

William Woodford
Stake Clerk

ecuadork wrote:Hi everyone,

I am the Stake Tech Specialist and I'm having some trouble installing a barcode scanner in our computer. I want to use the scanner to read temple recommend barcodes as we activate them. The scanner is a Symbol LS2208 handheld. It has a USB connection. I've tried the quick start guide 1-2-3 steps that they indicated should be done but it is not working for us. I also tried installing the 123Scan program but it is beyond my knowledge and it looks like a customization program for the scanner. I don't know if I chose the right setting. I've tried both the HID Keyboard Emulation and the IBM hand=held usb settings. All I need it to do is scan those recommend barcodes. I installed one at work using the quick start guide and it work in a snap. Any suggestions or has anyone gone through this problem?
William Woodford

User avatar
aebrown
Community Administrator
Posts: 14685
Joined: Tue Nov 27, 2007 8:48 pm
Location: Sandy, Utah

Postby aebrown » Sun Mar 15, 2009 1:28 pm

wwoodford wrote:There is a a pdf file in MLS that you can print with the instructions on setting up and calibrating the barcsode scanner.


The PDF file is:

Code: Select all

C:\Program Files\LDS Church\MLS\lib\TES\TESInstructions.en.pdf

jdlessley
Community Moderators
Posts: 6522
Joined: Sun Mar 16, 2008 11:30 pm
Location: USA, TX

Postby jdlessley » Sun Mar 15, 2009 2:07 pm

Alan_Brown wrote:The PDF file is:

Code: Select all

C:\Program Files\LDS Church\MLS\lib\TES\TESInstructions.en.pdf
There is a single page pdf file, barCodeSetup.en.pdf, in the same folder Alan gave that has just the scanner installation and programming instructions.
JD Lessley
Have you tried finding your answer on the LDS.org Help Center page or the LDSTech wiki?

libertysys
New Member
Posts: 1
Joined: Mon Jan 24, 2011 11:57 pm

Postby libertysys » Tue Jan 25, 2011 12:13 am

hi everyone

I have purchased intermec printer. I have no idea how to installed and work. I used intermec 2415, intermec 2435.

jdlessley
Community Moderators
Posts: 6522
Joined: Sun Mar 16, 2008 11:30 pm
Location: USA, TX

Postby jdlessley » Tue Jan 25, 2011 12:28 am

libertysys wrote:hi everyone

I have purchased intermec printer. I have no idea how to installed and work. I used intermec 2415, intermec 2435.
It sounds like you are asking about how to install and use either a printer or a barcode scanner for personal use. You would be better off searching outside the LDSTech forums for this help since these forums are focused on technology used in the Church. The Church does not use the intermec printer or scanners.
JD Lessley
Have you tried finding your answer on the LDS.org Help Center page or the LDSTech wiki?


Return to “Clerk Computers”

Who is online

Users browsing this forum: No registered users and 1 guest