Page 1 of 1
Meeting House Webcasting SW not encoding sound
Posted: Mon Jan 18, 2010 5:32 pm
by Paulbb1
We have been trying to encode on the new SW but it is not working. We have sound to the Osprey 210 capture card via the line out on the card but not in the data stream.
Is there an incompatibility with this card and the software?
When using Windows Media Encoder the sound is encoded.
Is this a known issue? I noted in the Wiki there was one other card doing the same. I wonder if the chipset is the same?
Arlan Beebe
Posted: Mon Jan 18, 2010 7:09 pm
by russellhltn
PaulBB1 wrote:We have sound to the Osprey 210 capture card via the line out on the card but not in the data stream.
Can you clarify that? At first read it sounds like you're using "line out" as a input. I'm guessing you really mean that you get a signal out of line out so the card must be getting audio but it's not in the data stream.
Sound
Posted: Tue Jan 19, 2010 9:51 am
by Paulbb1
Your correct. I was sending a response to
webcastbeta@sites.ldschurch.org on this issue and found the fuzzy sentence. I corrected the way it read.
Since WME works and the MH webcasting doesn't does that mean that it is a software issue that can be corrected?
Posted: Sun Jan 31, 2010 1:55 pm
by harddrive
I just posted a longer post in another thread. However basically for me using a TV wonder 550 PCI. If I accept video and audio through the coax cable, I get static and the sound is terrible.
So I tried using the RCA out jacks on the VCR/DVD combo that I'm using to the auxiliary in on the sound card and ever thing worked terrific. Audio was clear and video was terrific.
With a P4 2.8, I find that the max streaming speed is 100k.
I hope that you get it to work.