VidiU Version 2.4.8 is bad
Posted: Wed Mar 22, 2017 2:45 pm
The VidiU version 2.4.8 is bad. It does not provide the correct receive rate stat of the broadcasting site. The streaming works properly, but the receive rate stat that it provides is faulty and is well below the correct receive rate that is using.
Version 2.4.7 is the latest working version.
For those who have updated to 2.4.8 or those who need to update to 2.4.7, then it can be downloaded from the Teradek site found here: http://teradek.com/pages/downloads.
Instructions for downloading and installing Teradek software versions.
1. Go to the website and select "VidiU & VidiU Mini"
2. Click the "Show Previous Versions" button
3. Click the download button for firmware version 2.4.7
4. On a turned on VidiU, use the GUI of the VidiU by bringing up a browser in the computer which is connected to the same network as the VidiU. Enter in the IP Address of the VidiU that can be found by navigating to the Network Settings on the VidiU box itself. (For more information on navigating the VidiU box, go here: https://www.lds.org/help/support/vidiu- ... e?lang=eng.)
5. In the GUI, click the "Settings" button found in the upper right corner.
6. Click the 'System" box.
7. in the Firmware Upgrade section, browse to the place where the VidiU firmware was downloaded and click the Upgrade button.
Version 2.4.7 is the latest working version.
For those who have updated to 2.4.8 or those who need to update to 2.4.7, then it can be downloaded from the Teradek site found here: http://teradek.com/pages/downloads.
Instructions for downloading and installing Teradek software versions.
1. Go to the website and select "VidiU & VidiU Mini"
2. Click the "Show Previous Versions" button
3. Click the download button for firmware version 2.4.7
4. On a turned on VidiU, use the GUI of the VidiU by bringing up a browser in the computer which is connected to the same network as the VidiU. Enter in the IP Address of the VidiU that can be found by navigating to the Network Settings on the VidiU box itself. (For more information on navigating the VidiU box, go here: https://www.lds.org/help/support/vidiu- ... e?lang=eng.)
5. In the GUI, click the "Settings" button found in the upper right corner.
6. Click the 'System" box.
7. in the Firmware Upgrade section, browse to the place where the VidiU firmware was downloaded and click the Upgrade button.