VidiU webcast left channel audio only

Conversations around originating a webcast for conference, including cameras and mixers.
Posts: 237
Joined: Sun Jan 28, 2007 9:01 pm
Location: Littleton, CO-USA

VidiU webcast left channel audio only

Postby mprusse » Mon Aug 15, 2016 9:10 am

Following instructions on mhtech as follows:

Configure Audio Input Settings
From the VidiU Web Interface, select "Settings" then click on the "Audio" icon. Configure your settings as instructed below:
1-Audio Source: "Analog" (unless audio will be embedded in the HDMI cable)
2-Channel: "Mono Left"
3-Level: "Line"
4-Left & Right Mutes: "Off"
5Left & Right Volumes: about 10 (Calibrate this setting during a test event. See Audio Setup.)
6-Select "Apply" to save your settings

We're inputting audio into the mini-jack on the VidiU. Tried both Stereo and Mono Left in step two above and get the same left channel only when listening on a computer with stereo speakers.

What am I missing?

Church Employee
Church Employee
Posts: 148
Joined: Mon Jun 09, 2014 1:41 pm

Re: VidiU webcast left channel audio only

Postby rannthal » Tue Aug 16, 2016 8:55 am

I'm not following exactly what you are trying to accomplish.

Posts: 498
Joined: Thu Jan 03, 2008 7:52 pm

Re: VidiU webcast left channel audio only

Postby harddrive » Tue Aug 16, 2016 9:20 am

If you are pulling the sound from the chapel audio, then you will get mono, which is left channel only.

Return to “Webcasting”

Who is online

Users browsing this forum: No registered users and 2 guests