Stake Conf issues
Posted: Sun Nov 24, 2013 9:59 pm
Hi,
I have been doing stake Conf webcast for 3 years now, for 3 conferences. We have improved significantly, but still come up with a few issues.
First to explain our setup.
We use a pretty new/hardware capable PC that connects to a video/audio mixer via USB. This mixer takes in the audio from the pulpit and video from a professional camera. The computer hardware, mixer, camera, cables and all that does not seem to be an issue.
We can still improve but the following is our main issue:
** Buffering and stream interruption problems on the receiving end. **
We use meetinghouse webcast to transmit and we put it on the High quality(1.7M up / 1.3M down).
Our stake bldg, last checked is at 2.6 up / 6.7 down, using speedtest.lds.org
I plan to retest all our ward building internet speeds and verify their download capabilities.
Any additional suggestions to prevent stream interruption and buffering?
I have been doing stake Conf webcast for 3 years now, for 3 conferences. We have improved significantly, but still come up with a few issues.
First to explain our setup.
We use a pretty new/hardware capable PC that connects to a video/audio mixer via USB. This mixer takes in the audio from the pulpit and video from a professional camera. The computer hardware, mixer, camera, cables and all that does not seem to be an issue.
We can still improve but the following is our main issue:
** Buffering and stream interruption problems on the receiving end. **
We use meetinghouse webcast to transmit and we put it on the High quality(1.7M up / 1.3M down).
Our stake bldg, last checked is at 2.6 up / 6.7 down, using speedtest.lds.org
I plan to retest all our ward building internet speeds and verify their download capabilities.
Any additional suggestions to prevent stream interruption and buffering?