Stake Conf issues

Conversations around originating a webcast for conference, including cameras and mixers.
abcampa
New Member
Posts: 13
Joined: Sun Feb 28, 2010 10:43 am
Location: US

Stake Conf issues

Postby abcampa » Sun Nov 24, 2013 9:59 pm

Hi,

I have been doing stake Conf webcast for 3 years now, for 3 conferences. We have improved significantly, but still come up with a few issues.

First to explain our setup.

We use a pretty new/hardware capable PC that connects to a video/audio mixer via USB. This mixer takes in the audio from the pulpit and video from a professional camera. The computer hardware, mixer, camera, cables and all that does not seem to be an issue.

We can still improve but the following is our main issue:

** Buffering and stream interruption problems on the receiving end. **

We use meetinghouse webcast to transmit and we put it on the High quality(1.7M up / 1.3M down).
Our stake bldg, last checked is at 2.6 up / 6.7 down, using speedtest.lds.org

I plan to retest all our ward building internet speeds and verify their download capabilities.

Any additional suggestions to prevent stream interruption and buffering?
Attachments
20131110_082411.jpg
(2.55 MiB) Downloaded 441 times
20131110_082403.jpg
(2.94 MiB) Downloaded 441 times

russellhltn
Community Administrator
Posts: 20750
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

Re: Stake Conf issues

Postby russellhltn » Sun Nov 24, 2013 10:02 pm

abcampa wrote:I plan to retest all our ward building internet speeds and verify their download capabilities.


That and disconnect all other connections during the conference. Especially wireless.
Have you searched the Wiki?
Try using a Google search by adding "site:tech.lds.org/wiki" to the search criteria.


Return to “Webcasting”

Who is online

Users browsing this forum: No registered users and 1 guest