Read Only Custom Postions

Discussions around using and interfacing with the Church MLS program.
Locked
daron
New Member
Posts: 10
Joined: Sat Apr 20, 2013 6:49 pm

Read Only Custom Postions

#1

Post by daron »

In MLS-> Organizations->Callings by Organization I've created some Custom Positions for RS, Primary, Other, etc. Some of these positions appear to Read-Only . For example I've added a position of "Emergency Preparedness Specialist" under "Other". The position column is not a link, but the words and the "remove" link is missing. These callings are behaving like positions from the stake. I can see but not change. I've talk with the stake specialist, thinking that the stake is setting a read-only flag somewhere and he assures me that they're not.

My questions are: 1) Why are these custom positions that I've added are read-only; 2) How do you make them update-able (I would like to update the set-apart flag on some of them); 3) If I cannot update them how could the be deleted; and 4) This seemed to have started right after the latest MLS update, could this be a MLS issue?

Thanks,
Bro. Baird
Ward Clerk
Lexington Park Ward, Suitland Maryland Stake.
eblood66
Senior Member
Posts: 3907
Joined: Mon Sep 24, 2007 9:17 am
Location: Cumming, GA, USA

Re: Read Only Custom Postions

#2

Post by eblood66 »

I can't say why that's happening. But to delete them I'd try deleting the entire custom position definition. Go to the organization screen and click on the Custom Positions tab on the left. If the custom position has a Remove link on that screen, try deleting the position. It should warn you about who currently holds that position and indicate that they will be released if you delete the position. Click OK to continue. Then if you still need the position add it again and re-enter the the specific members in the position as needed. You may want to write down the sustained dates before deleting the custom position if you need to re-enter them.
scgallafent
Church Employee
Church Employee
Posts: 3025
Joined: Mon Feb 09, 2009 4:55 pm
Location: Riverton, Utah

Re: Read Only Custom Postions

#3

Post by scgallafent »

This is a known is that will be corrected in MLS 3.7.3. The update should be ready within a few weeks.

You can try a unit data refresh to see if that corrects it. There was another forum user who reported that didn't correct it for him, but that resolved the issue when we did our initial testing.
Locked

Return to “MLS Support, Help, and Feedback”