window envelope with a check inside

Discussions around using and interfacing with the Church MLS program.
User avatar
kh_design
Member
Posts: 85
Joined: Wed Feb 06, 2008 2:57 pm
Location: ..
Contact:

window envelope with a check inside

Postby kh_design » Mon Feb 18, 2008 5:38 pm

To be less obvious that a check printed from MLS is inside a window envelope, reformatting the layout of the center check stub moving the name and address down 1 1/8" (29mm) and to the right 1 1/8" (29mm), Like wise move the Purpose up 1 1/8" (29mm). This will allow the name and address on the center check stub to show through the standard unit window envelopes from the distribution center. This will be less obvious that a check printed from MLS is inside a window envelope. Also allow option for country to not be printed on checks.

User avatar
aebrown
Community Administrator
Posts: 14688
Joined: Tue Nov 27, 2007 8:48 pm
Location: Sandy, Utah

Postby aebrown » Mon Feb 18, 2008 8:06 pm

kh_design wrote:To be less obvious that a check printed from MLS is inside a window envelope, reformatting the layout of the center check stub moving the name and address down 1 1/8" (29mm) and to the right 1 1/8" (29mm), Like wise move the Purpose up 1 1/8" (29mm). This will allow the name and address on the center check stub to show through the standard unit window envelopes from the distribution center. This will be less obvious that a check printed from MLS is inside a window envelope. Also allow option for country to not be printed on checks.


Since MLS 2.7, the stub has been formatted to work very nicely for windowed envelopes, so as far as I can tell, this has already been addressed.


Return to “MLS Support, Help, and Feedback”

Who is online

Users browsing this forum: No registered users and 1 guest