Ward Conference Sustaining of Officers

Discussions around using and interfacing with the Church MLS program.
User avatar
kfindlay
New Member
Posts: 14
Joined: Thu May 17, 2007 8:41 am
Location: Utah Native in Madison Alabama Over 25 Years

Ward Conference Sustaining of Officers

Postby kfindlay » Mon Feb 11, 2008 12:18 pm

We have ward conference coming up next weekend and the sustaining of officers form in the MLS still has the old first presidency.

Are updates like these done during regular transmitt receive or do we need to wait for a roll in the software release?t

User avatar
opee
Member
Posts: 332
Joined: Mon Jun 25, 2007 2:00 am
Location: Grand Rapids, MI

Postby opee » Mon Feb 11, 2008 5:05 pm

kc4rzw wrote:We have ward conference coming up next weekend and the sustaining of officers form in the MLS still has the old first presidency.

Are updates like these done during regular transmitt receive or do we need to wait for a roll in the software release?t



See this thread: http://tech.lds.org/forum/showthread.php?t=815 -- it appears that it will be ready in a few weeks. We had to edit the information on the form by hand during our conference yesterday.

User avatar
childsdj
Community Moderators
Posts: 258
Joined: Wed Feb 07, 2007 9:51 am

Postby childsdj » Mon Feb 11, 2008 9:42 pm

Opee is correct. This form will be available sometime in the next few weeks. Until then, just cross out the names and manually fill them in.

waltbristow
New Member
Posts: 21
Joined: Fri Jan 19, 2007 3:49 pm
Location: Lynchburg, VA, USA

Postby waltbristow » Tue Feb 12, 2008 5:25 am

We had ward conference this last weekend. With the ability to print the Officers Sustained-Ward form to PDF, it's actually fairly easy to fill in the blanks, print to PDF, open the PDF, select all, copy and then paste into a word processing program. A couple minutes later the First Presidency has been adjusted, President Uchtdorf removed from the Qourum of the Twelve, etc. I even increased the font size a bit to make it easier for tired eyes to read, adjusted the line breaks so that names weren't broken between lines (makes it less likely to make mistakes reading them) and removed references to callings that weren't filled. For example, we don't have a secretary in our high priests group, have only one counselor in the Sunday School presidency, etc. The member of the high council who read the sustainings form didn't have to stumble over handwritten changes, callings that weren't filled, etc.

Walt Bristow
Lynchburg (VA) 2nd Ward Clerk

SmithGW
Community Moderators
Posts: 99
Joined: Thu Feb 08, 2007 6:42 am

Sustaining Officers

Postby SmithGW » Fri Feb 15, 2008 1:56 pm

I wouldn't go overboard on editing the Officers Sustained form. It has to be included in the Annual History. Updating the First Presidency and the Twelve is one thing, but I wouldn't go any further than that. As others have indicated, the new forms will be out in MLS very soon.

User avatar
aebrown
Community Administrator
Posts: 14693
Joined: Tue Nov 27, 2007 8:48 pm
Location: Sandy, Utah

MLS 2.8b7 has updated Officers Sustained form

Postby aebrown » Sun Feb 17, 2008 7:49 am

smithgw wrote:I wouldn't go overboard on editing the Officers Sustained form. It has to be included in the Annual History. Updating the First Presidency and the Twelve is one thing, but I wouldn't go any further than that. As others have indicated, the new forms will be out in MLS very soon.


The latest beta of MLS 2.8 (2.8b7) has the updated Officers Sustained form with the new First Presidency and Twelve. So those stakes that are beta testing MLS 2.8 already have the current list of General Authorities, and whenever MLS 2.8 is released generally, everyone will have it.

MLS 2.8b7 seems to have the form available for English, German, French, and Italian, but the other translations for the two new paragraphs are lagging. But I assume that they will be available for the general release.

unixguy
New Member
Posts: 41
Joined: Sun Mar 04, 2007 7:43 pm

Postby unixguy » Mon Feb 18, 2008 7:47 am

I was going to print out a replacement section on the form and then just tape it over the printed out section. I'd like to keep the font the same though-- does anybody know what font is used on this form?

User avatar
aebrown
Community Administrator
Posts: 14693
Joined: Tue Nov 27, 2007 8:48 pm
Location: Sandy, Utah

Postby aebrown » Mon Feb 18, 2008 10:33 am

unixguy wrote:I was going to print out a replacement section on the form and then just tape it over the printed out section. I'd like to keep the font the same though-- does anybody know what font is used on this form?


It appears to be Helvetica, according to the PDF generated.

However, if your ward conference is not this Sunday, I'd advise waiting -- I would guess there's a reasonable chance MLS 2.8 will be released before March 9, in which case you would be able to let MLS generate the correct form.

unixguy
New Member
Posts: 41
Joined: Sun Mar 04, 2007 7:43 pm

Postby unixguy » Mon Feb 18, 2008 11:47 am

Thanks! My computer apparently doesn't have helvetica, but a google search indicates that arial might be a close enough replacement.

My second option if I couldn't find the font was to download 2.8 just so I could print this form-- Ward Conference is this Sunday, so really needed to get it done this week. :)

wasatchpowder-p40
New Member
Posts: 10
Joined: Tue Feb 12, 2008 10:43 pm

Postby wasatchpowder-p40 » Wed Feb 20, 2008 4:29 pm

I just printed out the sustainings, scanned the document into Word, made the corrections manually and reprinted. Easy.

Dave


Return to “MLS Support, Help, and Feedback”

Who is online

Users browsing this forum: No registered users and 1 guest