Wegener Unity 522 Sat Receiver Setup for 2nd Language

Discussions around the satellite system and video distribution.
harriesrr
New Member
Posts: 1
Joined: Thu Oct 03, 2013 11:54 am

Wegener Unity 522 Sat Receiver Setup for 2nd Language

Postby harriesrr » Thu Oct 03, 2013 12:06 pm

Our Satellite receiver was replaced with a Wegener Unity 522 receiver. We have 2 amplifiers in our sound closet, one, Channel 4 for English, the other channel 6 for Spanish. When the new receiver as installed, it was connected to the English amp, but no connection to the Spanish amp. There are RCA connections on the back of the unit. Has anyone had experience in setting up the receiver for a second language? There are instruction in the OSD under Audio Setup. Any help appreciated.

russellhltn
Community Administrator
Posts: 20767
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

Re: Wegener Unity 522 Sat Receiver Setup for 2nd Language

Postby russellhltn » Thu Oct 03, 2013 1:00 pm

Call Satellite support. They send the settings over the air and will overwrite anything you set.

Odds are, if you look at the back of the receiver, English will be one channel (left?). The other is Spanish. The standard is for English/Spanish to be a language "pair" (left/right). If you find that both sides are English, you'll have to call Satellite support to get you unit re-programmed.
Have you searched the Wiki?
Try using a Google search by adding "site:tech.lds.org/wiki" to the search criteria.


Return to “Satellite”

Who is online

Users browsing this forum: No registered users and 1 guest